NordicTrack Incline Trainer X3 Treadmill User Manual - Page 7

1. Make sure that the power cord is unplugged. 1 With the help of a second person, tip the incline trainer onto its left side. Have the second person hold the incline trainer to prevent it from tipping. Attach four Base Feet (80) and four Base Foot Spacers (79) to the Base (78) with four #8 x 1" Tek Screws (2). Be careful not to overtighten the Tek Screws. 79 80 2 79 80 2 78 80 79 2 79 80 2 2. Hold the Upright (74) near the incline trainer, with the brackets on the Upright oriented as 2 shown. See the inset drawing. Wrap the wire tie in the Upright (74) around the end of the Upright Wire (72). Then, pull the other end of the wire tie until the Upright Wire is routed completely through the Upright. Attach the Upright (74) to the Base (78) with four 3/8" x 3 1/2" Bolts (3) and four 3/8" Star Washers (9). Start all four Bolts before tightening any of them. Be careful not to pinch the Upright Wire (72). 72 72 74 Bracket Tie 74 Wire Tie 3 9 3 78 9 7