NordicTrack Incline Trainer X3 Treadmill User Manual - Page 8

3. With the help of a second person, carefully tip the incline trainer down so that the Base (78) is 3 flat on the floor. Attach a Wheel (77) to each side of the Base (78) with a 3/8" x 2 1/2" Bolt (4) and a 3/8" Nut (8) (only one side shown). 8 77 4 78 4. Have a second person hold the Left Handrail (69) near the Yoke (88). Locate the wire tie inside the Yoke. Wrap the end of the wire tie around the Left Pulse Wire (70). Pull the other end of the wire tie until the Left Pulse Wire (70) is extending from the hole in the Yoke (88). At the same time, slide the Left Handrail (69) into the Yoke. Make sure not to pinch the Left Pulse Wire. Attach the Left Handrail (69) to the Yoke (88) with two 5/16" x 3/4" Bolts (6); do not fully tighten the Bolts yet. Repeat this step with the Right Handrail (75) and the Right Pulse Wire (71). 4 69 70 88 6 6 Wire Ties 75 71 8