NordicTrack Incline Trainer X3 Treadmill User Manual - Page 9

5. Slide the two Handrail Covers (76) onto the lower ends of the Left and Right Handrails (69, 5 75). See the inset drawing. Make sure that the curved end of each Handrail Cover is fac- ing the Upright (74). 69 Slide the lower ends of the Handrails (69, 75) onto the brackets on the Upright (74). Attach each Handrail (69, 75) to the Upright (74) with two 1/4" x 1" Bolts (32) and two 1/4" Flat Washers (25); do not fully tighten the Bolts yet. 70 74 76 Bracket 71 75 25 32 Curved End 76 76 Bracket 32 25 6. Hold the Yoke Spacer (87) near the Upright (74). Make sure that the curved side of the Yoke Spacer is facing the Upright. Insert the Upright Wire (72) through the Yoke Spacer and the Yoke (88). Attach the Yoke (88) and the Yoke Spacer (87) to the Upright (74) with two 3/8" x 5" Bolts (7) and two 3/8" Star Washers (9). Firmly tighten the Bolts. Remove the wire ties from the Upright Wire (72) and the Pulse Wires (70, 71). Firmly tighten the 5/16" x 3/4" Bolts (6). See step 5. Firmly tighten the 1/4" x 1" Bolts (32), and slide the Handrail Covers (76) down over the Bolts and against the Upright (74). 6 88 6 70 72 Wire Ties 74 87 9 7 71 6 Curved Side 9