NordicTrack S10 I Studio Bike Instruction Manual - Page 12

the Screws, and then tighten them.

Page 12 highlights

9. IMPORTANT: Have a second person move the Console (10) to a level position. While 9 the second person holds the Console steady, 10 tighten the M10 x 52mm Bolt (94). Avoid pinching the wires (C) Next, orient the Hand Weight Tray (38) so that the largest opening (E) is facing forward. 38 E Tip: Avoid pinching the wires (C). Attach the Hand Weight Tray (38) to the Console Support (8) with four M4 x 14mm Screws (17); start all the Screws, and then tighten them. C 94 8 17 10. Orient the Saddle Post (13) as shown. 10 Loosen the indicated Post Knob (100). Next, insert the Saddle Post (13) into the Frame (1), and slide the Saddle Post to the desired height. Then, tighten the Post Knob. 13 100 1 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

12
10
17
C
94
9
9.
IMPORTANT: Have a second person move
the Console (10) to a level position. While
the second person holds the Console steady,
tighten the M10 x 52mm Bolt (94).
Next, orient the Hand Weight Tray (38) so that
the largest opening (E) is facing forward.
Tip: Avoid pinching the wires (C).
Attach the
Hand Weight Tray (38) to the Console Support
(8) with four M4 x 14mm Screws (17);
start all
the Screws, and then tighten them.
Avoid pinching
the wires (C)
8
38
E
13
1
100
10
10. Orient the Saddle Post (13) as shown.
Loosen the indicated Post Knob (100). Next,
insert the Saddle Post (13) into the Frame (1),
and slide the Saddle Post to the desired height.
Then, tighten the Post Knob.