NordicTrack S10 I Studio Bike Instruction Manual - Page 27

3. View the console tour presentation. To view a tour presentation that will guide you through the features of the console, touch How It Works. 4. Customize the unit of measurement and other settings. To customize the unit of measurement, the time zone, or other settings, touch Equipment Settings, and then touch the desired settings. The screen will show the progress of the update. When the update is complete, the studio cycle will turn off and then turn back on. If it does not, press the power switch into the off position. Wait for several seconds, and then press the power switch into the reset position. Note: It may take a few minutes for the console to be ready for use. Note: Occasionally, a firmware update may cause the console to function slightly differently. These updates are always designed to improve your exercise experience. The console can display speed and distance in either standard or metric units of measurement. 5. View machine information. Touch Equipment Info, and then touch Machine Info to view information about your studio cycle. 6. Update the console firmware. 7. Calibrate the incline system. To calibrate the incline system, touch Maintenance, touch Calibrate Incline, and then touch Begin. The frame will automatically rise to the maximum incline level, lower to the minimum incline level, and then return to the starting position. This will calibrate the incline system. When the incline system is calibrated, touch Finish. For the best results, regularly check for firmware updates. Touch Maintenance, and then touch Update to check for firmware updates using your wireless network. The update will begin automatically. IMPORTANT: To avoid damaging the studio cycle, do not turn off the power while the firmware is being updated. IMPORTANT: Keep pets, feet, and other objects away from the studio cycle while the incline system is calibrating. 8. Exit the settings main menu. If you are in a settings menu, touch the back button. Then, touch the close button (x symbol) to exit the settings main menu. 27