NordicTrack S10 I Studio Bike Instruction Manual - Page 21

HOW TO SET UP THE CONSOLE 6. Calibrate the incline system. Before you use the studio cycle for the first time, set up the console. 1. Connect to your wireless network. To use iFit workouts and to use several other features of the console, the console must be connected to a wireless network. Follow the prompts on the screen to connect the console to your wireless network. 2. Customize settings. Follow the prompts on the screen to set the desired unit of measurement and your time zone. Note: To change these settings later, see HOW TO CHANGE CONSOLE SETTINGS on page 26. 3. Log into or create an iFit account. Follow the prompts on the screen to log into your iFit account or to create an iFit account. First, touch the profile button, touch Settings, touch Maintenance, and then touch Calibrate Incline. The frame will rise and lower as it calibrates. For more information, see HOW TO CHANGE CONSOLE SETTINGS on page 26. The console is now ready for you to begin working out. The following pages explain the workouts and other features that the console offers. To use the manual mode, see this page. To use a map workout or an onboard workout, see page 23. To create a draw-your-own-map workout, see page 24. To use an iFit workout, see page 25. To change console settings, see page 26. To connect to a wireless network, see page 28. To use the sound system, see page 28. To connect an HDMI cable, see page 29. Note: If there is a sheet of plastic on the screen, remove the plastic. 4. Tour the console. HOW TO USE THE MANUAL MODE The first time you use the console, a tour presentation will guide you through the features of the console. Note: To view the tour presentation again at any time, touch the profile button (person symbol) on the screen, touch Settings, and then touch How It Works. 1. Touch the screen or press any button on the console to turn on the console. See HOW TO TURN ON THE POWER on page 20. Note: It may take a few moments for the console to be ready for use. 5. Check for firmware updates. 2. Select the main menu. First, touch the profile button, touch Settings, touch Maintenance, and then touch Update. The console will check for firmware updates. For more information, see HOW TO CHANGE CONSOLE SETTINGS on page 26. When you turn on the console, the main menu will appear on the screen after the console boots up. If you are in a workout, touch the screen, touch Pause, touch End, and then touch Finish to return to the main menu. If you are in the settings menus, touch the back button (arrow symbol) and then touch the close button (x symbol) to return to the main menu. 21