NordicTrack X7i Treadmill English Manual - Page 10
Attach the left Upright not shown
View all NordicTrack X7i Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
3. Remove the four 3/8" x 2 3/4" Screws (22) from the Uprights (83). Save the Screws. 3 83 22 22 4. Set the Uprights (83) on the Base (74). Make sure that the hole with the Upright Wire (75) 4 is on the right side. Attach the right Upright (83) to the Base (74) with two of the 3/8" x 3 1/4" Screws (18) and two of the 3/8" x 2 3/4" Screws (22) that you just removed and four 3/8" Star Washers (3); do not fully tighten the Screws yet. Make sure that the Base Wire (52) is not pinched. Attach the left Upright (not shown) as described above. Note: There is not a wire on the left side. Then, fully tighten the 3/8" x 3 1/4" Screws (18) and the 3/8" x 2 3/4" Screws (22). 83 18 3 3 75 74 52 3 3 22 10
10
4.
Set the Uprights (83) on the Base (74).
Make
sure that the hole with the Upright Wire (75)
is on the right side.
Attach the right Upright (83) to the Base (74)
with two of the 3/8" x 3 1/4" Screws (18) and
two of the 3/8" x 2 3/4" Screws (22) that you just
removed and four 3/8" Star Washers (3);
do not
fully tighten the Screws yet.
Make sure that
the Base Wire (52) is not pinched.
Attach the left Upright (not shown) as
described above.
Note: There is not a wire on
the left side.
Then, fully tighten the 3/8" x 3 1/4" Screws (18)
and the 3/8" x 2 3/4" Screws (22).
4
22
3
3
52
74
75
18
83
3.
Remove the four 3/8" x 2 3/4" Screws (22)
from the Uprights (83). Save the Screws.
3
83
22
22
3
3