NordicTrack X7i Treadmill English Manual - Page 27

SYMPTOM: The incline of the incline trainer does not change correctly a.  Hold down the Stop button and the Speed increase button, insert the key into the console, and then release the Stop button and the Speed increase button. Next, press the Stop button and then press the Incline increase or decrease button. The incline trainer will automatically rise to the maximum incline level and then return to the minimum level. This will recalibrate the incline system. If the incline system does not begin calibrating, press the Stop button again, and then press the Incline increase or decrease button again. When the incline system is calibrated, remove the key from the console. SYMPTOM: The tablet holder does not stay in place b. Tighten the three indicated screws (A) slightly, 1/4 of a turn or less, until the Tablet Holder (65) stays in place when it is rotated to the desired position. b 65 A A a. Remove the six M4 x 16mm Screws (8) from the back of the Tablet Holder (65) . a c. S ee drawing a at the left. Reattach the Tablet Holder (65) with the six M4 x 16mm Screws (8); start all six Screws, and then tighten them. Be careful not to overtighten the Screws. 65 8 8 27