NordicTrack X7i Treadmill English Manual - Page 9

ASSEMBLY • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. • After shipping, there may be an oily substance on the exterior of the incline trainer. This is normal. If there is an oily substance on the incline trainer, wipe it off with a soft cloth and a mild, non-abrasive cleaner. • To identify small parts, see page 8. • Assembly requires the following tools: the included hex keys a standard screwdriver To avoid damaging parts, do not use power tools. 1. Go to my.nordictrack.com on your computer and register your product. 1 • documents your ownership • activates your warranty • ensures priority customer support if assistance is ever needed Note: If you do not have internet access, call Customer Care (see the front cover of this manual) and register your product. 2. Make sure that the power cord is unplugged. 2 Remove the four 3/8" x 3 1/4" Screws (18) from the Base (74) (only one side is shown). Save the Screws. 18 74 9