Oki B431dn B411 B431 User Guide - Eng - Page 134

Power Save setting., Software Problems.

Get Oki B431dn PDF manuals and user guides View all Oki B431dn manuals
Add to My Manuals
Save this manual to your list of manuals

Page 134 highlights

SYMPTOM PROBLEM SOLUTION When you try to print nothing happens, but printer indicates it is ready to receive data. Garbage prints. Printer freezes or displays error message when computer is rebooted. Odors. Printer is on but must warm up before a job is printed. Configuration error. Check cable connection. If more than one printer is available, make sure your printer has been selected. Incorrect cable configuration. Also, see Software Problems. Booting the computer while the printer is on can cause a communications error. Check cable configuration, continuity, and length. Turn printer off before rebooting computer. Gases are given off by forms or adhesives passing through the hot fusing unit. Make sure the forms you use can withstand heating, and provide adequate ventilation. Power Save mode is set on to conserve energy. The fuser must heat up before you can begin printing the next job. To eliminate warm up delay, change Power Save setting. 134 > B411/B431 Troubleshooting

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
134
>
B411/B431 Troubleshooting
When you try
to print
nothing
happens, but
printer
indicates it is
ready to
receive data.
Configuration error.
Check cable
connection. If more
than one printer is
available, make sure
your printer has
been selected.
Garbage
prints.
Incorrect cable
configuration. Also, see
Software Problems.
Check cable
configuration,
continuity, and
length.
Printer freezes
or displays
error message
when
computer is
rebooted.
Booting the computer while
the printer is on can cause
a communications error.
Turn printer off
before rebooting
computer.
Odors.
Gases are given off by
forms or adhesives passing
through the hot fusing unit.
Make sure the forms
you use can
withstand heating,
and provide
adequate
ventilation.
Printer is on
but must
warm up
before a job is
printed.
Power Save mode is set on
to conserve energy. The
fuser must heat up before
you can begin printing the
next job.
To eliminate warm
up delay, change
Power Save setting.
SYMPTOM
PROBLEM
SOLUTION