Oki C3530nMFP Network User's Guide - Page 15

2. If not already configured, a suitable IP address, Subnet Mask and Gateway address should be configured. If necessary, refer to Microsoft On-line Help. CAUTION The IP address entered must be unique and valid. Entering an incorrect IP address may cause severe network problems. You can check the address with the network administrator. 3. If your network environment uses domain names, DNS should be enabled and configured on your system. However, this step is not essential to enable network printing. 4. Restart the operating system. CONFIGURING WINDOWS TO USE TCP/IP NETWORKING WINDOWS 98/ME 1. Select Start -> Settings -> Control Panel. 2. In the Control Panel, double-click on the Network icon. 3. In the "Network" dialog box, click the Configuration Panel. 4. If "Client for Microsoft Networks" is not listed, click the Add button. 5. In the "Select Network Component Type" dialog box, select Protocol and click the Add button. 6. In the "Select Network Protocol" dialog box, select Microsoft from the list of manufacturers and select TCP/IP from the list of network protocols. Click OK. 7. Click OK in the "Network" dialog box. You may be prompted for the Windows installation CD-ROM. 8. Follow the remaining dialog box prompts. WINDOWS NT 4.0 1. Select Start ->Settings -> Control Panel. 2. Double-click the Network icon. 3. In the "Network dialog box", click the "Protocols" tab. 4. If the TCP/IP Protocol is not listed, click the Add button. Network User's Guide for C3400n and C3530 MFP Windows - 15