Oki C3530nMFP Network User's Guide - Page 23
Oki LPR, Standard TCP/IP Port using LPR or Port 9100, Settings, Port 9100
View all Oki C3530nMFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
WINDOWS XP NOTE: Windows XP requires administrator privileges. With Windows XP, there are four options for printing using TCP/IP: > Oki LPR > Standard TCP/IP Port using: • LPR • Port 9100 Oki LPR To install the Oki LPR port, see "Oki LPR" on page 20. Standard TCP/IP Port using LPR or Port 9100 To install this port, proceed as follows: 1. Select Start -> Control Panel -> Printers and Faxes - Add a Printer. 2. Click Next. 3. Select "Local printer attached to this computer" and ensure that the "Automatically detect and install my Plug and Play printer" check box is not selected. Click Next. 4. Select "Create a New Port" and change "Type of Port:" to "Standard TCP/IP Port". 5. Click Next. The "Add Standard TCP/IP Printer Port Wizard" is displayed. 6. Click Next and enter the host name or IP address for the printer, for example, '192.168.1.31'. If the above IP address is entered, the Port Name will default to IP_192.168.1.31. 7. Click Next. "Additional Port Information Required" is displayed. 8. Under "Device Type", select Custom and click Settings. 9. Depending on whether you are installing the Windows Standard TCP/ IP Port using LPR or Port 9100, enter the following details: LPR > Set "Protocol" to LPR. > Under "LPR Settings", enter Queue Name: 'lp' and ensure that "SNMP Status Enabled" is not selected. Port 9100 Network User's Guide for C3400n and C3530 MFP Windows - 23