Oki C3530nMFP Network User's Guide - Page 7

SPECIFICATION ITEM Frame Types Network Interface Network Protocols Functions SPECIFICATION IEEE 802.2 IEEE 802.3 Ethernet-II, SNAP, AUTO 100BASE-TX 10BASE-T TCP/IP Network layer ARP, Session layer TCP, UDP Application layer LPR, HTTP, BOOTP, DHCP, SNMP, DNS. Self-diagnostic test printing Monitoring and configuration by Web browser SELF-DIAGNOSTIC TEST With the printer power switched on, press the TEST button located on the Network Interface Panel (at the rear of the printer) for more than three seconds and then release. The self-diagnostic test results and configuration settings are printed. On the first page of the Network Information that is printed out, under the heading "General Information" the MAC or Ethernet Address is given. For example: MAC Address 00:80:87:D4:FA:00 DEFAULT USER NAME AND PASSWORD To apply configuration changes using a Web browser, you will be prompted for a username and password. The username is 'root' and the default password is the last six characters of the Ethernet (MAC) address, e.g. 'D4FA00' (any alpha characters must be in upper case). You can change the root password to allow you to change settings and configure the printer through the Web browser. You can find instructions on how to change the password for the Network Card Setup sections for Windows or Mac. Network User's Guide for C3400n and C3530 MFP Network Configuration - 7