Oki C5500n OkiLAN 8300e Network User's Guide (American English) - Page 25

OkiLAN 8300e Network User°s Guide, Configuration - 25, Location, Comments, Printer Reboot

Page 25 highlights

Location Printer Trap Setup . . . Comments By selecting the button, the following dialogue box is displayed: bmp32.bmp In the dialogue box, the following items can be configured: Printer Trap This community name is assigned to Community Name outgoing printer status traps such as off-line, paper out, etc. TCP#1-5 Set the IP address to which a Trap packet will be sent. You can set up to five IP addresses. Detail . . . By selecting the Detail button, the following items can be configured: Trap Enable Set sending a Trap packet, enabled or disabled, for each destination. Printer Reboot Set sending a Trap, enabled or disabled, when the printer restarts. Receive Illegal Set sending a Trap, enabled or disabled, when illegal data is received. On-Line Set sending a Trap, enabled or disabled, when the printer turns to On-Line. Off-Line Set sending a Trap, enabled or disabled, when the printer turns to Off-Line. Paper Out Set sending a Trap, enabled or disabled, when paper is out. OkiLAN 8300e Network User's Guide Configuration - 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107

OkiLAN 8300e Network User°s Guide
Configuration - 25
Printer Trap
Setup . . .
By selecting the button, the following dialogue box is
displayed:
bmp32.bmp
In the dialogue box, the following items can be
configured:
Printer Trap
Community Name
This community name is assigned to
outgoing printer status traps such as
off-line, paper out, etc.
TCP#1±5
Set the IP address to which a Trap
packet will be sent. You can set up to
five IP addresses.
Detail . . .
By selecting the Detail button, the
following items can be configured:
Trap Enable
Set sending a Trap
packet, enabled or
disabled, for each
destination.
Printer Reboot
Set sending a Trap,
enabled or
disabled, when the
printer restarts.
Receive Illegal
Set sending a Trap,
enabled or
disabled, when
illegal data is
received.
On-Line
Set sending a Trap,
enabled or
disabled, when the
printer turns to
On-Line.
Off-Line
Set sending a Trap,
enabled or
disabled, when the
printer turns to
Off-Line.
Paper Out
Set sending a Trap,
enabled or
disabled, when
paper is out.
Location
Comments