Oki C9600n C9600 Network and Configuration Guide - Page 165
Port 9100, Click [Create a New Port] and click [Type Standard TCP/IP
View all Oki C9600n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
7. Click [Next]. "Welcome to the Add Standard TCP/IP Printer Port Wizard" appears. 8. Click [Next] and enter [Printer name or IP address], for example: 172.168.1.31. If the example IP address is entered, the Port Name will default to IP_172.168.1.31. 9. Click [Next]. The "Additional Port Information Required" windows appears. 10. Under [Device Type], click [Custom] → [Settings]. 11. Ensure [Protocol] is set to [LPR]. 12. Ensure [Queue Name] is lp and [SNMP Status Enabled] is deselected. 13. Click [OK]. 14. Follow the on-screen instructions to finish the installation. Port 9100 1. Click [Start] → [Settings] → [Control Panel] → [Printers and Other Hardware]. 2. Click [Printers and Faxes]. 3. Click [Add Printer] → [Next]. 4. Click [Local printer attached to this computer], clear the [Automatically detect and install my Plug and Play printer] check box. 5. Click [Next]. 6. Click [Create a New Port] and click [Type Standard TCP/IP Port]. 7. Click [Next]. The "Welcome to the Add Standard TCP/IP Printer Port Wizard" appears. 8. Click [Next] and enter [Printer name or IP address], for example: 172.168.1.31. If the example IP address is entered, the Port Name will default to IP_172.168.1.31. Printing from Windows: Using TCP/IP Protocol • 165