Oki C9600n C9600 Network and Configuration Guide - Page 185
press the Enter key. Perform the following settings, Log out from the network interface card.
View all Oki C9600n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
5. Type 1 and press the Enter key. Perform the following settings: Please select (1- 99)? 1 No. Message Value 1 : TCP/ IP protocol : ENABLE 2 : IP address : 172.168.20.127 3 : Subnet Mask : 255.255.255.0 4 : Gateway address : 172.168.20.1 5 : RARP protocol : DISABLE 6 : DHCP/ BOOTP protocol: DISABLE 7 : root password : " " 99 : Back to prior menu Please select (1- 99)? 6. Log out from the network interface card. 7. Turn the printer off and on again to validate the settings. Printing from UNIX: Configuring the Print Server • 185
Printing from UNIX: Configuring the Print Server
•
185
5. Type
1
and
press the Enter key. Perform the following settings:
Please select (1- 99)? 1
No. Message Value
1 : TCP/ IP protocol : ENABLE
2 : IP address : 172.168.20.127
3 : Subnet Mask : 255.255.255.0
4 : Gateway address : 172.168.20.1
5 : RARP protocol : DISABLE
6 : DHCP/ BOOTP protocol: DISABLE
7 : root password : “ “
99 : Back to prior menu
Please select (1- 99)?
6.
Log out from the network interface card.
7.
Turn the printer off and on again to validate the settings.