Oki C9600n C9600 Network and Configuration Guide - Page 250
USB Setup, Storage Setup
View all Oki C9600n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 250 highlights
USB Setup Item Value USB Enable Disable Speed 480Mbps 12Mbps Soft Reset Enable Disable Offline Receive Enable Disable Serial Number Enable Disable Storage Setup Item Check File System Value Off HDD Check All No Sectors Yes Description Enables/Disables the USB interface. Sets the maximum USB interface transfer speed. Enables/Disables the Soft Reset command. When this is set to Enable, the interface keeps the receive-possible state even when you press the Offline operating panel switch. The interface sends the BUSY signal only when the reception buffer is full or a service call occurs. PS only. Enables/Disables the USB serial number, used to identify a USB device to which a PC is connected. Description Resolves any mismatch between actual memory and displayed memory available in a file system and performs administration data (FAT information) recovery. Performs these by file system. This function takes several tens of seconds to complete. HDD: Performs recovery only for HDD. Performs recovery of a defective HDD sector information and a file system mismatch as mentioned above. It takes 30 to 40 minutes to complete this function for an HDD of 10GB. 250