Oki C9600n C9600 Network and Configuration Guide - Page 54
Reset, Test Print, IP Address Setup, Enter the [Ethernet Address] MAC Address and the [IP
View all Oki C9600n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
ᮣ Reset Resets the selected network interface card. ᮣ Test Print Prints the self-diagnostic test pages (see page 12). ᮣ IP Address Setup Sets the static IP address of the network interface card manually. If you only use TCP/IP and the print server has not yet been configured, occasionally it may not be displayed on AdminManager. You can configure the IP address of the print server by this function. 1. Enter the [Ethernet Address] (MAC Address) and the [IP Address], then click [OK]. NOTE The Ethernet (MAC) Address is displayed under "General Information" on the self-diagnostic test printout (see page 12). 2. AdminManager asks whether you want to initialize the network interface card or not. Select [Yes]. NOTE Even if you select [No] here, the IP address that you set can be used after turning the printer OFF and ON. The requirement to turn your printer OFF and ON is dependent on the network interface card. Configuration: Using AdminManager Standard Setup • 54