Olympus 5060 C-5060 Wide Zoom Basic Manual (11 MB) - Page 12

basic_e_x191_6.fm Page 12 Thursday, August 28, 2003 12:44 PM Memory gauge The memory gauge lights up when you take a still picture. While the gauge is lit, the camera is storing the picture on the card. The memory gauge indication changes as shown below depending on the shooting status. The indication is not displayed during movie recording. a Shoot b Shoot Before shooting (Gauge is off) One picture taken (Lit) En Battery check c More than two taken (Lit) Shoot d Wait No more pictures can be taken (Fully lit) Wait until the gauge returns to the status on the left to take the next shot. If the remaining battery power is low, the battery check indication on the control panel and monitor changes as follows when the camera is turned on or while the camera is in use. Battery check e f Control panel Lights Blinks Monitor Status Lights (green) Remaining power level: high (Goes off after a while) Blinks (red) Remaining power level: low If you intend to use the camera for a long period of time, charge the battery as soon as possible. The green lamp and orange lamp at the Remaining power level: No indication side of the viewfinder blink. (The control exhausted panel turns off automatically.) Charge the battery. 12 En