Olympus 5060 C-5060 Wide Zoom Basic Manual (11 MB) - Page 42

basic_e_x191_6.fm Page 42 Thursday, August 28, 2003 12:44 PM Single-frame erase 1 Set the mode dial to q and turn the camera on. • The monitor turns on. 2 Use the arrow pad or control dial to display the picture you want to erase. 3 Press S. • The S ERASE screen is displayed. 4 Press ac to select YES, then press e. • The picture is erased and the menu is closed. All-frame erase 1 In the top menu, select MODE MENU → CARD → CARD En SETUP, and press d. 2 Press ac to select S ALL ERASE, then press e. 3 Press ac to select YES, then press e. • All the pictures are erased. J FORMATTING (CARD SETUP) This function lets you format a card. Formatting prepares cards to receive data. Before using non-Olympus cards or cards which have been formatted on a PC, you must format them with this camera. • All data stored on the card, including protected pictures, is erased when the card is formatted. When formatting a used card, confirm Note there are no pictures that you still want to keep on the card. 1 In the top menu, select MODE MENU → CARD → CARD SETUP, and press d. •P A S M r n m l k j i The I FORMAT screen is displayed. •q The CARD SETUP screen is displayed. 42 En