Olympus 8080 C-8080 Wide Zoom Reference Manual (English) - Page 146

8 Customizing the camera ALL RESET - Saving the camera's settings This function lets you keep the current camera settings when you turn off the power. The same settings are then reactivated next time you turn the camera on. The settings affected by All Reset are listed on the next page. The All Reset setting (ON/OFF) applies to all the modes. If All Reset is set in one mode, this setting applies to all the other modes, both shooting and playback. ON OFF All settings are returned to the factory default settings after the power is turned off. Ex. If the record mode is changed to SQ1 and All Reset is set to ON, the record mode will return to HQ (factory default setting) next time the camera is turned on. The settings made before the power is turned off are saved and are activated again next time the camera is turned on. Mode dial 1 In the top menu, select MODE MENU E ALL RESET ON or OFF, and press e. Or in C mode, select E ALL RESET ON or OFF, and press e. g"Menu basics" (P.38) • Press e again to exit the menu. • In C mode, set the mode dial to a different mode to exit the menu. 8 Arrow pad OK button • My Mode settings and functions on the SETUP tab (ALL RESET, W, 8, etc.) are not returned to the factory default settings even when All Reset is Note set to ON. • When ALL RESET is set to OFF, it may take time to start up when the power is turned on. Customizing the camera 145