Olympus 8080 C-8080 Wide Zoom Reference Manual (English) - Page 200
If an error code is displayed
UPC - 050332146105
View all Olympus 8080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
If an error code is displayed If an error code appears on the camera's monitor during direct print setting or printing, see the following table. For more details, refer to the printer's instruction manual. Monitor indication NO CONNECTION NO PAPER NO INK JAMMED SETTINGS CHANGED PRINT ERROR Possible cause The camera is not connected to the printer correctly. There is no paper in the printer. Corrective action Disconnect the camera and connect it again correctly. Load some paper in the printer. The printer has run out of Replace the ink cartridge in ink. the printer. The paper is jammed. Remove the jammed paper. The printer's paper Do not manipulate the cassette has been printer while making settings removed or the printer has on the camera. been manipulated while making settings on the camera. There is a problem with Turn off the camera and the printer and/or camera. printer. Check the printer and remedy any problems before turning the power on again. TIPS • If an error code other than those shown above is displayed, refer to "Error 11 codes" (P.200). Direct printing (PictBridge) 199