Olympus 8080 C-8080 Wide Zoom Reference Manual (English) - Page 188
Connecting the camera to a printer
UPC - 050332146105
View all Olympus 8080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
Connecting the camera to a printer Use the USB cable provided to connect the camera to a PictBridge-compatible printer. 1 Set the camera's USB mode to PRINT. g"USB setup - Setting the connection destination" (P.175) • Make sure the card containing the pictures you want to print is selected. CANCEL SELECt GO 2 Turn the printer on and plug the printer end of the USB cable into the printer's USB port. • For details of how to turn the printer on and the position of the USB port, refer to the printer's instruction manual. 3 Set the camera's mode dial to q and plug the USB cable into the camera's USB connector. Connector cover USB connector 4 Press the power switch to turn the camera Power switch on. • ONE MOMENT is displayed and the camera and printer are connected. The PRINT MODE 11 SELECT screen is displayed on the monitor. Make the print settings on the camera's monitor. Go to g"Printing pictures" (P.188). Direct printing (PictBridge) • If the screen is not displayed after a few minutes, turn off the camera and start again from Step 1. Note 187