Olympus 8080 C-8080 Wide Zoom Reference Manual (English) - Page 77
P-AF – Changing the auto focus mode, Press, while holding down AF, to select P-AF, then press - underwater set up
UPC - 050332146105
View all Olympus 8080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Focusing applications P-AF - Changing the auto focus mode For auto focusing, this camera is equipped with a contrast detection system measured by CCD and a phase difference detection system measured by AF sensor. You can select whether to use only the contrast detection system or to use the contrast detection system in conjunction with the phase difference detection system. AF sensor OFF ON The camera focuses on the subject using only the contrast detection system. The camera focuses on the subject using both the contrast detection system and the phase difference detection system. Focusing is performed faster than when OFF is selected. 5 Mode dial 1 Press e while holding down AF/&/MF. • In MF or %MF mode, the menu is not displayed when e is pressed. AF/&/MF AF/Macro/MF button Advanced shooting 2 Press ac to select P-AF, then press d. 3 Press ac to select ON or OFF, then press e. • Press e again to exit the menu. Arrow pad OK button FOCUS MODE AF MODE FULLtIME AF P-AF SELECt OFF ON GO • When the subject is within 80 cm (2.6 ft.) of the camera, the camera focuses using only the contrast detection system. Note • Focusing may take some time if P-AF is set to ON when a conversion lens or underwater housing is attached to the camera. • In n mode, P-AF is fixed to OFF. The setting cannot be changed. 76