Olympus E510 E-510 Instruction Manual (English) - Page 38
How AE bracketing compensates exposure in each exposure mode - battery
UPC - 050332160484
View all Olympus E510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
e.g.) When BKT is set to [3F 1.0EV] -1.0EV ±0 +1.0EV Compensation value: 0.3, 0.7 or 1.0 The exposure compensation value will change if the EV step is changed. The EV step can be changed using the menu. Exposure compensation value can be adjusted within a range of ±1.0. g "EV step" (P. 78) Number of frames: 3 3 Menu MENU[X][AE BKT] [OFF]/[3F 0.3EV]/[3F 0.7EV]/[3F 1.0EV] Shooting functions k Various shooting functions CANCEL SELECT GO Start shooting. • The shooting method varies depending on the setting of single-frame or sequential shooting. g "Sequential shooting" (P. 45) Exposure Single-frame shooting Each time the shutter button is pressed fully, a picture is taken at a different exposure. • The setting for the next shot is displayed in the viewfinder. Sequential shooting Viewfinder compensation value of the next shooting frame Hold down the shutter button until the selected number of frames are taken. The camera shoots each frame at a different exposure. • Releasing the shutter button stops auto bracketing shooting. When it stops, 0 on the control panel is displayed in green. How AE bracketing compensates exposure in each exposure mode Depending on the selected exposure mode, exposure is compensated in the following way: P mode A mode S mode M mode : Aperture value and shutter speed : Shutter speed : Aperture value : Shutter speed TIPS To apply AE bracketing to the exposure value you have compensated: J Compensate the exposure value, then use the AE bracketing feature. AE bracketing is applied to the exposure value you have compensated. x Notes 38 EN • During sequential shooting, if the battery check blinks due to low battery, the camera stops shooting and starts saving the pictures you have taken on the card. The camera may not save all of the pictures depending on how much battery power remains.