Olympus T-100 T-100 Instruction Manual (English) - Page 34
Setting the date and time, Adjusting the brightness of the monitor - three beeps
UPC - 050332172791
View all Olympus T-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Setting the operation sound [BEEP] s (Settings 2) X BEEP Submenu 2 OFF/ON Application Turns off or on the operating sound/warning sound of the camera buttons. Adjusting the CCD and the image processing function [PIXEL MAPPING] s (Settings 2) X PIXEL MAPPING This function has already been adjusted at factory shipping, and no adjustment is needed right after purchase. Approximately once a year is recommended. For best results, wait at least one minute after taking or viewing pictures before performing pixel mapping. If the camera is turned off during pixel mapping, be sure to perform it again. To adjust the CCD and the image processing function Press the H button when [START] (Submenu 2) is displayed. ● The camera checks and adjusts the CCD and the image processing function at the same time. Adjusting the brightness of the monitor [s] s (Settings 2) X s Submenu 2 BRIGHT/ NORMAL Application Selects the monitor brightness depending on the surrounding brightness. Setting the date and time [X] s (Settings 2) X X "Setting the date, time and time zone" (p. 12) To select the date display order 1 Press I after setting Minute, and use FG to select the date display order. X Date order Y M D TIME 2010. 02 . 26 12 : 30 Y/M/D CANCEL MENU SET OK 34 EN