Optoma EH7700 User Guide - Page 14
Powering the projector On / Off, Powering On the Projector - lamp
View all Optoma EH7700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Installation Powering the projector On / Off Powering On the Projector When Power mode (Standby) is set to Eco, the VGA and RJ45 will be deactivated when the projector is in standby. 1. Remove the projector cap. 1 2. Securely connect the power cord and signal cable. Power on the switch 2 and the Power LED flashes Red. 3. Turn on the lamp by pressing " " button either on the rear of the projector or on the remote. The POWER LED will now turn Blue. 3 The startup screen will display in approximately 10 seconds. The first time you use the projector, you will be asked to select the preferred language and power saving mode. 4. Turn on and connect the source that you want to display on the screen (computer, notebook, video player, etc). The projector will detect the source automatically. If not, push menu button and go to "OPTION". Make sure that the "Source Lock" has been set to "Off". If you connect multiple sources at the same time, press the "SOURCE" button on the control panel or direct source keys on the remote control to switch between inputs. 3 Turn on the projector first and then select the signal sources. WIRED REMOTE-IN VGA-OUT Or SOURCE INFO. MENU RE-SYNC LENS ENTER FOCUS SHUTTER ZOOM S-VIDEO VIDEO Y Pb Pr 1 VGA 2-IN VGA 1-IN HDMI 2 HDMI 1 R G B H V 12V OUT RS232 2 English 14