Optoma EH7700 User Guide - Page 69
Telnet Commands, AMX Device Discovery commands
View all Optoma EH7700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Appendices Telnet Commands • Port: support 3 ports of 23/1023/2023 • Multi-connections: Projector could receive commands from different ports at the same time • Command Format: Follow RS232 command format (support both of ASCII and HEX) • Command Response: Follow RS232 return message. Lead Code Projector ID Command ID space variable ~ X X Fix code One 00 Digit~ X X X Defined by Optoma 2 or 3 Digit. See the Follow content One Digit n Per item Definition carriage return CR Fix code One Digit When the data length is greater or shorter than indicated by the data length code, the projector returns the error code to computer. AMX Device Discovery commands • UDP : 239.255.250.250 • Port No. : 9131 • Each UDP broadcast information as below are updated around 40 seconds Command Device-UUID Device-SKDClass Device-Make Device-Model Config-URL Revision Description MAC address (Hex value without' ':' separator) The Duet DeviceSdk class name Remark (Parameter) 12 digits VideoProjector Maker name MakerPXLW Model name Projector Device's IP address LAN IP address is shown up if LAN IP address is valid. Wireless LAN IP address is shown up if Wireless LAN IP address is valid. http://xxx.xxx.xxx.xxx/index.html The revision must follow a major.minor.micro scheme. The revision is only increased if the command protocol is modified. 1.0.0 69 English