Optoma TS725 User Manual - Page 16

Powering Off the Projector, Warning Indicator, Power

Get Optoma TS725 PDF manuals and user guides View all Optoma TS725 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Installation Powering Off the Projector 1. Press Power to turn off the projector lamp, a message displays on the projector's screen. 2. Press Power again to confirm, otherwise the message disappears after 15 seconds. 3. The cooling fans continue to operate for about 10 seconds for cooling cycle. When the Power LED flashes slowly green, the projector has entered standby mode. If you wish to turn the projector back on, you must wait until the projector has completed the cooling cycle and has entered standby mode. Once in standby mode, simply press Power to restart the projector. 4. Disconnect the power cord from the electrical outlet and the projector. 5. Do not turn on the projector immediately following a power off procedure. Warning Indicator v When the LAMP indicator lights red, the projector will automatically shut itself down. Please contact your local reseller or service center. See pages 60-61. v When the TEMP indicator lights red, it indicates the projector has overheated. The projector will automatically shut itself down. Under normal conditions, the projector can be switched on again after it has cooled down. If the problem persists, you should contact your local dealer or our service center. See pages 60-61. v When the TEMP indicator flashes red, it indicates the fan has failed. Please contact your local dealer or our service center. See pages 60-61. English 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
English
±¶
Powering Off the Projector
1. Press
Power
to turn off the projector lamp, a message displays on the
projector’s screen.
2. Press
Power
again to confirm, otherwise the message disappears
after 15 seconds.
3. The cooling fans continue to operate for about 10 seconds for cooling
cycle. When the Power LED flashes slowly green, the projector
has entered standby mode.
If you wish to turn the projector back on, you must wait until the
projector has completed the cooling cycle and has entered standby
mode. Once in standby mode, simply press
Power
to restart the
projector.
4. Disconnect the power cord from the electrical outlet and the pro-
jector.
5. Do not turn on the projector immediately following a power off
procedure.
Warning Indicator
v
When the LAMP indicator lights red, the projector will automati-
cally shut itself down. Please contact your local reseller or service
center. See pages 60-61.
v
When the TEMP indicator lights red, it indicates the projector
has overheated. The projector will automatically shut itself down.
Under normal conditions, the projector can be switched on again
after it has cooled down. If the problem persists, you should con-
tact your local dealer or our service center. See pages 60-61.
v
When the TEMP indicator flashes red, it indicates the fan has
failed. Please contact your local dealer or our service center.
See pages 60-61.
Installation