Optoma TS725 User Manual - Page 50
Replacing the Lamp, Loosen the two captive screws on the lamp compartment cover.
View all Optoma TS725 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Appendices Replacing the Lamp The projection lamp should be replaced when it burns out. It should only be replaced with a certified replacement part, which you can order from your local dealer. Important: 4 The lamp contains a certain amount of mercury and should be disposed of according to local ordinance regulations. 4 Avoid touching the glass surface of the new lamp, doing so may shorten its operation life. Warning: 4 Be sure to turn off and unplug the projector at least an hour before replacing the lamp. Failure to do so could result in a severe burn. 1. Loosen the two captive screws on the lamp compartment cover. 2. Remove the lamp compartment cover. 3. Remove the two screws from the lamp module. 4. Lift the module handle up and pull firmly on the module handle to re-move the lamp module. English 50