Panasonic AGMX70 AGMX70 User Guide - Page 20

Power supply and backup The operation panel settings are stored in the memory when the power is turned off. The default settings are established when the power is turned back on by selecting [Power] > [Reset] on the [Setup] initial setting screen, and the system is started from the settings which were established at the completion of the previous session by selecting [Power] > [Preset]. If [Demo] has been selected on the [Setup] panel, the demonstration mode is established when the power is turned on. Select [Reset] or [Preset] on the [Setup] panel from the demonstration mode to restart the system. The demonstration mode can be exited using [Enter]. The panel settings, setup settings and their files, key learn settings and event memory data are saved. These settings and data are backed up by the flash memory even when the power is turned off. Setting panel screen The unit's various functions are adjusted on the setting panel screen. This screen is basically configured as follows. ≥ Displayed at the top level of the screen are the joystick XY and rotary Z values and the audio meter. ≥ Displayed at the second level of the screen from the top are the event number, transition time, pattern number and internal video setting. ≥ Displayed at the third level of the screen from the top are the title of the menu on the display and the item setting ranges. ≥ The settings are displayed from the center down. The settings of four items are displayed per page. If there are more than four item settings, they can be scrolled and displayed using the rotary 1 or 2 control. Two lines are allocated to each item, and 7 or so alphanumerics are displayed per item. In some cases, abbreviations are used for the displays. ≥ The display of selected setting item is highlighted in reverse video. ≥ Selected setting items are returned to their default settings using [Shift] + [.]. [INTVideo] internal video setting screen Wash Pb 128 Pr 128 Y 128 Event ME Time 00E 10:00F Pattern 3015 INT Blue INT Video Grade Pos 80 Back Color Level Pattern Grade Matte White 255 H1 0 Color Bar Memory Page Frame 1 1F Mode Field Write R1 R2 R3 R4 R5 Wht Yelw Cyan Gren Mgt Red Blue Blk Cst1 Cst2 CL Br St 1-30 Mv 1-30 The internal video settings are performed on this screen. This menu is selected when the INTVideo button below the LCD display is pressed. It is not selected using INT at a crosspoint. While these settings are performed, the color setting mode is established for joystick XYZ and rotary Z control. The color set appears at the top right. Setting items [Back Matte], [Color Bar] and [Memory] are selected using the rotary 1 control. 20