Panasonic AGMX70 AGMX70 User Guide - Page 33

Effect-by-effect setting screens [Effects] setting This is used to perform the DVE settings. Select the [Off], [Shadow] or [Trail] effect using the rotary 2 control. Set the [Light] (lighting) using the rotary 5 control. This is valid only when the 3D optional board (AG-VE70) has been installed for use. ≥ When [Shadow] has been set When [Shadow] has been selected, the shadow position can be set by setting the position while holding down [Shift]. In this case, the center, scene grabber and hold buttons flash temporarily. ≥ When [Trail] has been set Set the trail color and spark using the rotary 3 control. Select the [Self] original image, [Self-spark], [BodM] border color or [BodM-spark] border spark. The time can be set to any value from 1 to 32 using the rotary 4 control. When trail has been set, the trail offset position can be set by setting the position while holding down [Shift]. In this case, the center, scene grabber and hold buttons flash temporarily. Whichever trail or shadow effect was selected last among trail and shadow for DSK, and multi strobe and decay for A/B videoEffects takes effect, and the previous effect is canceled. R1 Effects R2 R3 Off Off Shadow Trail R4 R5 Light On Lights when 3D board has been installed. R1 Effects R1 Effects R2 R3 Shadow R4 R5 Light On Lights when 3D board has been installed. R2 Trail R3 R4 R5 Time Light Self 16 On Self Self-spark BodM BodM-spark 1 - 32 Lights when 3D board has been installed. Only one of three settings-namely, soft, border or soft border-for both multi strobe and pattern edges can be selected when a special pattern has been selected. For further details, refer to the note on page 26. 33