Panasonic AGMX70 AGMX70 User Guide - Page 23

[Color Effects] setting screen Color Pb 128 Pr 128 Effect C Gain 0 Event ME Time 00E 10:00F Pattern 3015 INT Blue Color Effects ch A Y Setup Y Gain Pb 0 0 Pr 128 C Gain 128 0 R1 R2 R3 R4 R5 This menu is selected using the A or B bus [Color Effects] button. If the status of the [Color Effects] button is not to be changed, press the [Color Effects] button of the bus to be set while holding down the [Shift] key. Settings can be performed separately for the A bus and B bus. Preview is set to A by pressing the [Color Effects] button for A. Preview is set to B by pressing the [Color Effects] button for B. The Y setup [-128 to 127] can be set using the rotary 1 control. The default setting is 0. The Y gain [-128 to 127] can be set using the rotary 2 control (0dB=0). The default setting is 0. The Pb and Pr color balance can be set using the joystick's X direction (for adjusting Pb) and rotary 3 control or using the joystick's Y direction (for adjusting Pr) and rotary 4 control, and the chroma gain can be set using the rotary Z and rotary 5 controls. At this time, the XYZ display is switched to Pb/Pr/C Gain. Using transition pattern numbers 200 to 211, 215 to 220 and 222, effects are applied to the B or Preset bus using the settings established for this channel, and the pattern is changed to MIX (56). ≥ In the case of pattern numbers 221, 222, 1068 and 1069, color effects can be applied to the B channel and transitions can be initiated. When this is done, the pattern is changed to MIX (56). (With the A bus/B bus) With the preset bus/program bus, the effects are applied to preset, and they are turned off by setting the reverse button to ON. ≥ Color effects cannot be applied to the INT EXT inputs. 23