Panasonic AGMX70 AGMX70 User Guide - Page 55
Memory] setting, Gen Lock] external synchronization setting, Video Format] setting
View all Panasonic AGMX70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
[Setup] initial setting screen [Memory] setting This is used to set the memories used for INTVideo and R1 R2 R3 R4 R5 DSK. When the setting is changed, all the memories are Memory INT V Title cleared. How much memory is to be used for [INT V] and 15 15 how much for [Title] for DSK and TitleKey is set using the rotary 2 and 3 controls. 0 - 30/26 0 - 30/26 If the allocation to one memory is changed, the allocation to the other memory will change so that the total remains 30. When a change is to be made, [OK?] appears. Execute the change using [Enter], and use [Shift] + [Enter] to cancel. The default setting is 15 each for [INT V] and [Title] with NTSC and 13 each for [INT V] and [Title] with PAL. [Gen Lock] external synchronization setting Select [G/L] or [ExtKey] as the [Ref In] (reference) source using the rotary 2 control. The default setting is [G/L]. Adjust the [H Phase] (horizontal phase) using the rotary 3 control. The default setting is 128. Adjust the [SC Phase] (subcarrier phase) using the rotary 4 control. The default setting is 512. [H Phase] and [SC Phase] are stored in the memory separately in accordance with [G/L] or [Ext Key] for the input. R1 R2 R3 R4 R5 Gen Ref In H Phase SC Phase Lock G/L 128 512 G/L 28 - 228 0 - 1023 Ext Key [Video Format] setting Either [NTSC] or [PAL] is selected as the format by the R1 R2 R3 R4 R5 rotary 2 control. Video Aspect Setup Pb Pr The default setting is the format used in the area where the Format NTSC 4:3 0 BCAM system was purchased. When a change is to be made, [OK?] appears. Execute the change using [Enter], and use [Shift] + [Enter] to cancel. NSTC 4:3 0 PAL 16:9 7.5 BCAM MII Set [4:3] or [16:9] as the [Aspect] ratio of the patterns using the rotary 3 control. The default setting is [4:3]. Select [0] or [7.5] for [Setup] using the rotary 4 control. The default setting is [0]. Select [BCAM] or [MII] for the [Pb Pr] component level using the rotary 5 control. The default setting is [BCAM]. When the NTSC or PAL format is changed, the system is initialized, and the [INT V] and title memories are cleared. 55