Panasonic AGMX70 AGMX70 User Guide - Page 32
Pattern Edge] setting, Pattern, Color, White, Width, <Note>
View all Panasonic AGMX70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Effect-by-effect setting screens [Pattern Edge] setting This is used to set edges for the patterns. The border color set here is used as the border matte for trail. It is updated by the color which is read out for the direct pattern. Select [Hard], [Soft], [Border] or [Soft Border] using the rotary 2 control. The default setting is [Hard]. When [Soft] or [Soft Border] has been selected, No.2001 to 2195 and 6008 to 6010 patterns cannot be selected. When [Soft Border] has been selected, the #701 to No.707 (24 to 27), 801 to 814 (183 to 196) patterns cannot be selected. The [Width] thickness can be set to any value from 1 to 255 using the rotary 3 control. The default setting is 32. Only 1 or 2 can be set for [Width] if any of the following patterns have been selected: ≥ No.701 to 707 (24 to 27), 801 to 814 (183 to 196) Select the [Color] border color using the rotary 4 control. [White], [Yellow], [Cyan], [Green], [Magenta], [Red], [Blue], [Black], [Custom1] or [Custom2] can be selected. Custom1 and Custom2 are colors which have been set by INT Matte. R1 R2 R3 R4 R5 Pattern Edge Width Color Hard 32 White Hard Soft Border Soft Border 1 - 255 White Yellow Cyan Green Magenta Red Blue Black Custom1 Custom2 When the PinP pattern has been selected and STILL is executed through B bus, the edge cannot be reflected. 32