Panasonic AGMX70 AGMX70 User Guide - Page 52
Power] power ON setting, Direct Pattern] setting
View all Panasonic AGMX70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
[Setup] initial setting screen [Power] (power ON) setting Whether the system is to be started from the [Reset] status, R1 R2 R3 R4 R5 from the [Preset] status or in the [Demo] mode can be Power selected using the rotary 2 control. Reset With [Reset], the settings except for the event memories, setup settings, file memory and key learn settings are initialized. With [Preset], the mode in which the system is started from Reset Preset Demo the status prior to power OFF is established when the power is next turned on. If no status prior to power OFF existed (when, for instance, the system is used for the very first time after assembly or its memories have been destroyed), the system is started from the factory setting status. With [Demo], the system starts up in the demonstration mode when the power is next turned on. This menu is displayed in the demonstration mode so that when the system is restarted by selecting [Preset] or [Reset], the regular operation screen will appear. Alternatively, when [Enter] is pressed, the demonstration mode is suspended and operation is enabled. To execute the demonstration mode again, turn the power off and then back on again. The audio faders can be used even in the demonstration mode. The default setting is [Preset]. [Direct Pattern] setting This is used to set the pattern which is to be called as the R1 R2 R3 R4 R5 direct pattern. Direct When [Setup] is selected using the rotary 2 control and Pattern Setup [Enter] is pressed, [OK?] appears so press [Enter] to change to the setting mode. Use [Shift] + [Enter] to cancel. When [Default] is selected using the rotary 2 control and Setup Default [Enter] is pressed, [OK?] appears so press [Enter] to change to the default setting. Use [Shift] + [Enter] to cancel. Setting method in the setting mode [ME] is selected for Preview so it can be used to check. 1. Press the direct pattern button. 2. The lamp of the selected button flashes. The [Mix], [Chrm] (chroma) key and [Lum] (luminance) key cannot be set. 3. Use the number keys to input the pattern to be assigned. (The pattern is displayed in the pattern area.) The program output can be checked using the wipe lever. 52