Panasonic CF-27LBAGHEM Operating Instructions - Page 17
Basic Operation, Handling the Touch Pad
View all Panasonic CF-27LBAGHEM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Operation Using the Touch Pad Work Surface Use the touch pad to move the cursor on the display and perform normal computer operations. Basic Operation Function Moving the Cursor Touch Pad Operation Move the tip of your finger lightly over the surface. Right Button Left Button Tapping/Clicking Double-Tapping/ Double-Clicking or tapping or clicking Dragging double-tapping or double-clicking Two quick taps, but on the second tap leaving your finger down (applying pressure) and moving it on the work surface. While holding down the button, moving your finger on the work surface. Handling the Touch Pad When using a key combination such as Fn + F5 , do not touch the touch pad. If a key combination is used while the pad is being touched, the function of the key combination will not work. In addition, it is possible that control of the cursor will be lost and the cursor will not show proper movements. In such cases, the computer has to be restarted by using the keyboard (e.g., ). Do not place any object on the work surface or press down forcefully with sharp-pointed objects (i.e. nails), hard objects that can leave marks (i.e. pencils and ball point pen). Do not allow things that could dirty the touch pad, such as oil. The cursor may not work properly in such cases. When the touch pad becomes dirty: Wipe to remove dirty areas by using a dry soft cloth such as gauze or a soft cloth first applied with detergent diluted with water and then thoroughly wrung. Do not use benzene or thinner, or disinfectant-type alcohol. 17