Panasonic KV-S5055C Operation Manual - Page 43

Changing the Scan Background Color, Switching the Reference Plate

Page 43 highlights

Operation Changing the Scan Background Color By switching the reference plates on the scanner, you can change the scanning background color between black and white. The default setting is black. Notice • Set the reference plate (F) and reference plate (B) to the same color. If the front and rear settings are different, then documents will not be scanned correctly. Switching the Reference Plate 1. Set the power switch (A) of the scanner to " " (OFF). • Remove any documents from the hopper. 1 2. Pull the ADF door release (A) towards you, and open the ADF door (B). 2 1 Operating Manual 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91

Changing the Scan Background Color
By switching the reference plates on the scanner, you can change the scanning background color between
black and white. The default setting is black.
Notice
Set the reference plate (F) and reference plate (B) to the same color. If the front and rear settings are
different, then documents will not be scanned correctly.
Switching the Reference Plate
1.
Set the power switch (
A
) of the scanner to "
" (OFF).
Remove any documents from the hopper.
1
2.
Pull the ADF door release (
A
) towards you, and open the ADF door (
B
).
1
2
Operating Manual
43
Operation