Panasonic KX-TG9321T Operating Instructions - Page 9

Getting Started To connect to 2 single-line telephone jacks "Click" "Transparent" plug "GREEN" plug To single-line telephone jacks (RJ11C) 2-wire cord 4-wire cord Line 1 Line 2 If you subscribe to a DSL/ADSL service Please attach a DSL/ADSL filter (contact your DSL/ADSL provider) to the telephone line between the base unit and the telephone line jack in the event of the following: - noise is heard during conversations. - Caller ID features do not function properly. To connect to a 2-line telephone jack For this connection, please purchase a Panasonic 2-line splitter (page 4). Example: DSL/ADSL line is line 2 "Click" If you use the unit as a single-line telephone only Be sure to connect the telephone line cord to LINE 1/2. Change the line selection mode from "Auto" to "Line1" (page 14). "Click" "Transparent" plug "GREEN" plug To 2-line telephone jack (RJ14C) 2-line splitter "Transparent" plug "Click" 2-wire cord 2-wire cord To single-line telephone jack (RJ11C) Note: L "Check tel line 2" is displayed on the unit. To erase it, see page 39. 4-wire cord DSL/ADSL filter* "Click" *DSL/ADSL filter (not supplied) is required if you have DSL/ADSL service. For assistance, please visit http://www.panasonic.com/help 9