Panasonic KXFLB881 Fax - Page 44
Using the unit with an answering machine, 8.1 Setting up the unit and an answering, machine
UPC - 037988840342
View all Panasonic KXFLB881 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
6. Fax 6.8 Using the unit with an answering machine 6.8.1 Setting up the unit and an answering machine 1 Connect the answering machine (1). L Answering machine is not supplied. L Remove the stopper (2) if attached. 2 1 2 Set the number of rings on the answering machine to 4 rings or less. L This will allow the answering machine to answer the call first. 3 Record a greeting message on the answering machine. L We recommend you record a message up to 10 seconds long, and not to pause for more than 4 seconds during the message. Otherwise, both machines will not function correctly. 4 Activate the answering machine. 5 Set the unit to the desired receiving mode (page 42). L If you set to FAX ONLY mode, change the ring setting in FAX ONLY mode to "5 EXT. TAM" (feature #210 on page 52). 6 Make sure each of the following are unique: - the remote access code of the answering machine - the fax activation code (feature #434 on page 55) - remote access to Phone Companies Voice Mail (if you subscribed) Note: L If the call is a phone call, the answering machine will record voice messages. If a fax calling tone is detected, the fax machine will receive a fax automatically. L Regarding the remote access code for the answering machine, see the operating instructions of the answering machine. Receiving a voice message and fax document in one call The caller can leave a voice message and send a fax document during the same call. Inform the caller of the following procedure beforehand. 1. The caller calls your unit. L The answering device will answer the call. 2. The caller can leave a message after the greeting message. 3. The caller presses {*}{#}{9} (pre-selected fax activation code). L The unit will activate the fax function. 4. The caller presses the start button to send a document. Note: L To use this feature, make sure remote fax activation is turned ON (feature #434 on page 55). The fax activation code can also be changed. L If there is no room left in the memory of your answering machine, the unit may not be able to receive documents. See the operating instructions of the answering machine and erase unnecessary messages. 44