Panasonic KXFPG372 KXFPG372 User Guide - Page 88
Basic features
View all Panasonic KXFPG372 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Features Summary Basic features Code #01: Setting the date and time SET DATE & TIME PRESS SET See page 31 for details. Code #02: Setting your logo YOUR LOGO PRESS SET See page 32 for details. Code #03: Setting your fax number YOUR FAX NO. PRESS SET See page 34 for details. Code #04: Printing the sending report SENDING REPORT MODE=ERROR [±] To print and check the sending report for fax transmission results (page 56). ERROR (default): The sending report will be printed only when fax transmission fails. ON: The sending report will be printed out after every transmission. OFF: The sending report will not be printed out. Code #06: Changing the ring setting in TAD/FAX mode TAD RING COUNT RINGS=2 [±] To change the number of rings before the unit answers a call in TAD/FAX mode. You can select from 1, 2 (default), 3, 4, " TOLL SAVER" and " RINGER OFF" . See page 65 for details. Code #06: Changing the ring setting in FAX ONLY mode FAX RING COUNT RINGS=3 [±] To change the number of rings before the unit answers a call in FAX ONLY mode. You can select from 1, 2, 3 (default) and 4. Code #10: Changing the incoming message recording time RECORDING TIME MODE=VOX [±] VOX (default): Unlimited. 1 MIN: Up to 1 minute. Code #11: Setting the remote operation ID REMOTE TAD ID ID=111 1. Press {MENU}. 2. Press {} and select this feature. 3. Enter any 3-digit number except a number using 0 or 7. L The default ID is "111". 4. Press {SET}. 5. Press {MENU}. Code #13: Setting the dialing mode DIALING MODE MODE=TONE [±] If you cannot dial, change this setting depending on your telephone line service. TONE (default): For tone dial service. PULSE: For rotary pulse dial service. Code #16: Setting the recording paper size PAPER SIZE =LETTER [±] LETTER (default): Letter or legal size paper. A4: A4 size paper. Code #17: Setting the ringer pattern RINGER PATTERN MODE=A [±] You can select from A (default), B and C. The selected ringer pattern will sound during setting. 88 See page 86 for the programming method.