Panasonic KXFPG372 KXFPG372 User Guide - Page 94

Display, Base unit

Get Panasonic KXFPG372 - FAX W/2.4GHZ PHONE PDF manuals and user guides View all Panasonic KXFPG372 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 94 highlights

Error Messages Display If the unit detects a problem, one or more of the following messages will appear on the display. Base unit CALL SERVICE CALL SERVICE2 L There is something wrong with the unit. Contact our service personnel. CHECK DOCUMENT L The document was not fed into the unit properly. Reinsert the document. If misfeeding occurs frequently, clean the document feeder rollers (page 108) and try again. L Attempted to transmit a document longer than 600 mm. Press {STOP} to remove the document. Divide the document into two or more sheets and try again. CHECK MEMORY L The memory (telephone numbers, parameters, etc.) has been erased. Reprogram. CHECK PAPER L The recording paper is not installed or the unit has run out of paper. Install paper and press {SET} to clear the message. To continue copying, try again (page 68). L The recording paper was not fed into the unit properly (page 105). Reinstall paper (page 18) and press {SET} to clear the message. L The recording paper has jammed near the recording paper entrance. Clear the jammed paper (page 103) and press {SET} to clear the message. Do not install folded or heavily curled paper. COVER OPEN b CHECK FILM L The covers are open. Close them. L The ink film is empty. Replace the ink film with a new one (page 101). L The ink film is not installed. Install it (page 14). L The ink film is slack. Tighten it (see step 7 on page 102). DIRECTORY FULL L There is no space to store new entries in navigator directory. Erase unnecessary entries (page 45). FAX IN MEMORY L The unit has a document in memory. See the other displayed message instructions to print out the document. FAX MEMORY FULL L The memory is full of received documents due to a lack of recording paper or a recording paper jam. Install paper (page 18) or clear the jammed paper (page 103). L When performing memory transmission, the document being stored exceeds the memory capacity of the unit. Transmit the entire document manually. MEMORY FULL L When making a copy, the document being stored exceeds the memory capacity of the unit. Press {STOP} to clear the message. Divide the document into sections. 94 For Fax Advantage assistance, call 1-800-435-7329.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
Error Messages
94
For Fax Advantage assistance, call 1-800-435-7329.
Display
If the unit detects a problem, one or more of the following messages will appear on the display.
Base unit
CALL SERVICE
CALL SERVICE2
L
There is something wrong with the unit.
Contact our service personnel.
CHECK DOCUMENT
L
The document was not fed into the unit
properly. Reinsert the document. If
misfeeding occurs frequently, clean the
document feeder rollers (page 108) and try
again.
L
Attempted to transmit a document longer
than 600 mm. Press
{
STOP
}
to remove the
document. Divide the document into two or
more sheets and try again.
CHECK MEMORY
L
The memory (telephone numbers,
parameters, etc.) has been erased. Re-
program.
CHECK PAPER
L
The recording paper is not installed or the
unit has run out of paper. Install paper and
press
{
SET
}
to clear the message.
To continue copying, try again (page 68).
L
The recording paper was not fed into the unit
properly (page 105). Reinstall paper
(page 18) and press
{
SET
}
to clear the
message.
L
The recording paper has jammed near the
recording paper entrance. Clear the jammed
paper (page 103) and press
{
SET
}
to clear
the message. Do not install folded or heavily
curled paper.
COVER OPEN
b
CHECK FILM
L
The covers are open. Close them.
L
The ink film is empty. Replace the ink film
with a new one (page 101).
L
The ink film is not installed. Install it
(page 14).
L
The ink film is slack. Tighten it (see step 7 on
page 102).
DIRECTORY FULL
L
There is no space to store new entries in
navigator directory. Erase unnecessary
entries (page 45).
FAX IN MEMORY
L
The unit has a document in memory. See the
other displayed message instructions to print
out the document.
FAX MEMORY FULL
L
The memory is full of received documents
due to a lack of recording paper or a
recording paper jam. Install paper (page 18)
or clear the jammed paper (page 103).
L
When performing memory transmission, the
document being stored exceeds the memory
capacity of the unit. Transmit the entire
document manually.
MEMORY FULL
L
When making a copy, the document being
stored exceeds the memory capacity of the
unit. Press
{
STOP
}
to clear the message.
Divide the document into sections.