Panasonic KXTG4133 KXTG4132 User Guide - Page 22
Main menu, FLASH, Operation, Sub-menu 1, Setting, the handset to answer a call, turn off this feature.
View all Panasonic KXTG4133 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Programming Sub-menu 1 Sub-menu 2 Change language Display Voice prompt*1 Main menu: a "Customer support"*12 Operation Displaying customer support Web address. Setting 1: 2: Español 1: 2: Español Code + #110 13 #112 13 Code + #680 - *1 If you program these settings using one of the handsets, you do not need to program the same item using another handset. *2 This menu is not displayed when scrolling through the display menus. It is only available in direct command code. *3 This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received. To turn this feature on, select "Caller ID auto". To turn this feature off, select "Manual". (Caller ID subscribers only) To use this feature, set the date and time first (page 12). *4 Ringer volume cannot be turned off for alarm, intercom calls, and paging. *5 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to 5). If you select a melody, you cannot distinguish lines by their ringers. *6 If you select one of the melody ringer tones, the ringer tone continues to play for several seconds even if the caller has already hung up. You may either hear a dial tone or no one on the line when you answer the call. *7 The preset melodies in this product are used with permission of © 2009 Copyrights Vision Inc. *8 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any keys, including confirmation tones and error tones. *9 If you subscribe to a Caller ID service and want to view the caller's information after lifting up the handset to answer a call, turn off this feature. *10The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if necessary. The setting should stay at "700 ms" unless pressing {FLASH} fails to pick up the waiting call. *11Generally, the line mode setting should not be changed. This setting automatically maintains receiver volume at the proper level depending on the current telephone line condition. Set the line mode to "A" if telephone line condition is not good. *12The handset can display the Internet address where you can download the operating instructions or get further information for this product, using your computer. 22 For assistance, please visit http://www.panasonic.com/help