Panasonic P2 Handheld Camcorder Advance Operating Instructions - Page 112
Using the USB HOST mode, Viewing hard disk drive information
View all Panasonic P2 Handheld Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Using a hard disk drive (PC mode: USB host) (continued) Using the USB HOST mode Usable hard disk drives • Hard disk drives connectable via USB 2.0 • The units compatible with the storage unit that has Panasonic USB I/F Refer to the support site at the following Website for the compatible units. http://pro-av.panasonic.net/ • While the USB HOST mode supports USB bus power (5 V, 0.5 A), some hard disk drives may not activate. If this is the case, power must be supplied in a different way. • Do not connect more than one drive even through a hub or any other device. Even with devices other than a hard disk drive, do not connect to the drive together with the hard disk drive through a hub. • The unit does not support a hard disk drive of 2 TB (2048 GB) or more. • To prevent copying or formatting problems from occurring during connection to a hard disk drive, be sure that the camera's battery is sufficiently charged or use the AC adaptor. • Versions 2.** and later of the P2 STORE (AJ-PCS060G) support USB host mode for this unit. Versions 1.** cannot connect. Please upgrade. Viewing hard disk drive information You can view the information on the hard disk drive connected via USB with the following steps. 1 Switch the mode to USB HOST. • "Switching to the USB HOST mode" (Page 111) • The thumbnail screen is displayed. (USB HOST is displayed in the bottom right.) 2 Connect the hard disk drive to the camera- recorder via USB 2.0. 3 Press the MENU button and select HDD → EXPLORE from the thumbnail menu. The screen provides the information about the hard disk drive. For Type S or P2 STORE Press the EXIT button. ↑↓ Press the SET button. For the FAT Press the EXIT button. ↑↓ Press the SET button. 112