Panasonic P2 Handheld Camcorder Advance Operating Instructions - Page 91
Formatting a P2 card
View all Panasonic P2 Handheld Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Playback Example of recording (DVCPRO HD) a clip on one P2 card: REC start Recording pause Recording duration = Approx. 7 min. Clip 1 COUNT value = 0001 Clip 2 COUNT value = 0002 5 min. 2 min. Example of recording a clip on two P2 cards: REC start Recording pause Clip 1 COUNT value = 0003 Clip 2 COUNT value = 0004 1st card 2nd card If the clip thumbnails are displayed as shown in the example above or their properties are indicated using a P2 device, the thumbnail and COUNT value of clip 1 will be displayed. Clear the uploaded metadata Select META DATA → INITIALIZE from the thumbnail menu, and press the SET button on the Operation lever. A YES/NO confirmation screen asks you to confirm that you want to initialize. Select YES using the Operation lever to initialize META DATA and clear the data read. Formatting a P2 card 1 Turn the POWER/MODE switch to set to PB/ THUMBNAIL mode. The thumbnail screen appears on the LCD monitor. 2 Press the MENU button and select OPERATION → FORMAT from the thumbnail menu. • When the screen shown below appears, select the slot number of the P2 card you want to format and press the SET button on the Operation lever. • Select EXIT if formatting is not required. 3 The following screen appears. Use the Operation lever to select YES. The selected P2 card is formatted. Check that no important data remains on a card before formatting since data erased by formatting cannot be recovered. 91