Panasonic P2 Handheld Camcorder Advance Operating Instructions - Page 142
RECORDING SETUP screen continued, Setting, Notes, TC PRESET, UB MODE, USER, TIME, DATE, EXT, TCG
View all Panasonic P2 Handheld Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Setup menu list (continued) RECORDING SETUP screen (continued) Item TC PRESET UB MODE UB PRESET ONE CLIP REC START TEXT MEMO TIME STAMP Setting Notes Sets the initial time code. • Set the frame value to 0 or multiples of 5 when shooting/ recording is set to 24P, 24PA, or 24PN. If any other value, the recorded time code will mismatch. Sets the data recorded in the camera-recorder user bits. USER, TIME, DATE, EXT, TCG, FRM. RATE "Setting user bits" (Page 62) Sets the user information. Select USER in UB MODE. Sets one-clip recording mode. ON, OFF "One-clip recording (ONE CLIP REC)" (Page 47) • Not available in the following conditions. · When REC FUNCTION is set to something other than NORMAL. · When REC SIGNAL is set to 1394. · When VFR is set to ON. Sets whether to automatically add a text memo at the recording start position each time you start recording. ON, OFF • Not available when REC FUNCTION is set to something other than NORMAL. • The text memo that is added when this is set to ON indicates the recording start position. For details on recording the text memo as text information, refer to "Setting of clip meta data" (Page 87). Determines whether or not date and time information will be superimposed on the image. ON: Superimposes date and time information on the image. OFF: Does not superimpose date and time information on the image. When DATE/TIME on the DISPLAY SETUP screen is set to OFF, the date and time information is not superimposed. ___indicates the factory setting. 142