Panasonic P2 Handheld Camcorder Advance Operating Instructions - Page 145
OUTPUT SEL screen
View all Panasonic P2 Handheld Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Menu OUTPUT SEL screen Item SDI & HDMI SELECT SDI & HDMI CHAR SDI OUT SDI METADATA SDI EDH DOWNCON MODE VIDEO OUT CHAR VIDEO OUT ZEBRA TC IN/OUT SEL Setting Notes Sets the type for the signal format output from the SDI OUT and HDMI OUT terminals. 1080i/720P: Follows 1080i, 720P settings of SYSTEM MODE. 1080i*1: Outputs at 1080i even when SYSTEM MODE is set to 720P. DOWNCON: Down converts to SD signal and outputs. • Not available when SYSTEM MODE is set to 480-59.94i, 576-50i. Selects whether or not to superimpose characters on images output from the SDI OUT and HDMI OUT terminals. ON, OFF Selects video output from the SDI OUT terminal. ON: Video is output from the SDI OUT connector. OFF: Video is not output from the SDI OUT connector. Sets metadata superimposition onto SDI OUT. ON: Superimposes UMID. OFF: Does not superimpose metadata. EXPANDED: UMID and the clip metadata, etc. are superimposed. Sets EDH superimposition when SDI OUT is an SD signal (480i, 576i). ON: Superimposes EDH. OFF: Does not superimpose EDH. Sets downconverter output (VIDEO OUT and DOWNCON • Not available when SYSTEM SDI OUT) in HD mode (1080i, 720P). MODE is set to 480-59.94i, SIDE CROP, LETTER BOX, SQUEEZE 576-50i. Specifies whether or not characters are superimposed on VIDEO OUT signals. ON: Superimposes characters. OFF: Does not superimpose characters. Specifies whether or not zebra pattern is superimposed on VIDEO OUT signals. ON: Displays a zebra pattern also on images output via the VIDEO OUT connector. OFF: The zebra pattern is not displayed in video output from the VIDEO OUT connector. Selects whether to use the TC IN/OUT terminal for input (TC IN) or output (TC OUT). TC OUT, TC IN *1: Use this to check video when SYSTEM MODE is set to 720-59.94P (50P) and 1080i is selected. ___indicates the factory setting. 145