Panasonic P2 Handheld Camcorder Advance Operating Instructions - Page 115
Writing data on a hard disk drive, Select YES.
View all Panasonic P2 Handheld Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Editing Writing data on a hard disk drive 1 Switch the mode to USB HOST. • "Switching to the USB HOST mode" (Page 111) • The thumbnail screen is displayed. (USB HOST is displayed in the bottom right.) 2 Connect a hard disk drive via USB. A hard disk drive that has not been formatted with the camera-recorder must be formatted as directed in "Formatting a hard disk drive" (Page 114). 3 Insert a P2 card. 4 Press the MENU button and select HDD → EXPORT from the thumbnail menu. Specify the slot that contains the P2 card bearing the data to be written to the hard disk drive. 5 Select YES. • This starts the write process. • When the data is being written, a progress bar is displayed. To discontinue writing, press the SET button on the Operation lever, and select YES when a confirmation message for cancellation appears. • When the writing is completed, the message "COPY COMPLETED!" is displayed. • To disable verification at the time of writing, select HDD → SETUP from the thumbnail menu and set the option VERIFY to OFF. This speeds up writing without verifying data writing. • Select ALL SLOT to write data collectively onto all P2 cards currently inserted in the unit to the hard disk drive. • For a Type-S hard disk drive, data can be written on a card basis. The data on up to 23 P2 cards can be stored on the hard disk drive. The data set on each P2 card is recognized as a separate drive by the PC. • If data on a P2 card that contains a defective clip must be written to a hard disk drive, then we recommend fixing or deleting that clip before writing the data. • When the process is discontinued during verification, the data on the P2 card has been written to the hard disk drive. 115