Panasonic P2 Handheld Camcorder Advance Operating Instructions - Page 45
One-shot recording (ONE SHOT REC), FUNCTION in the RECORDING SETUP
View all Panasonic P2 Handheld Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Shooting • The pre-recording and one-clip recording functions are not available. • Sound is not recorded. • Data recorded (until the stop recording) in this mode is recorded as a single file. • There is no output from the DVCPRO/DV connector. One-shot recording (ONE SHOT REC) This function records a single shot at each unit of time which has been set. 1 Check that the SYSTEM SETUP screen is set up as described on page 43. • Refer to the section "Basic operations of setup menus" (Page 28 of Vol. 1) for menu operation. 2 Select ONE SHOT in the menu option REC FUNCTION in the RECORDING SETUP screen. (Page 141) 3 Set the time in the menu option ONE SHOT TIME in the RECORDING SETUP screen. (Page 141) 4 Press the START/STOP button. • The camera-recorder will pause recording after making a recording that lasts the duration set in step 3. • Push the Operation lever in the direction (STOP) to stop recording. • To cancel this function, turn the camerarecorder off or select NORMAL in the REC FUNCTION option. • The following indications appear to the left of the operation status display. ·· During recording: "I-REC" stays lit. ·· During a pause: "I-PAUSE" stays lit. ·· When stopped: "I"- in "I-PAUSE" blinks. • No other functions are available during operation. • The pre-recording and one-clip recording functions are not available. • Sound is not recorded. • Data recorded (until the stop recording) in this mode is recorded as a single file. • There is no output from the DVCPRO/DV connector. • During continuous one-shot recording, recording operation speed may be decreased. 45