Panasonic PVDV401D PVDV201 User Guide - Page 12

Supplying Power Battery Care Caution: • Charge only with specified charger. • Charge the Battery within an ambient temperature range of 32° F (0° C) and 104° F (40° C). • The Battery may be warm after charging or just after use. This is normal. • Do not use an insufficiently charged or worn out Battery. • If charging is done in extreme low or high temperatures, Battery charge time increases. Safety precautions: • Do not get the Battery near, or dispose of in fire. • Do not directly connect (short circuit) the positive (+) and negative (-) terminals. • Never attempt to disassemble or reassemble the Battery. Use AC Adaptor 1 BATTERY RELEASE Switch 2 To avoid damage to the Battery: • Do not drop or jar the Battery. • Use the Battery with specified models only. • If the Battery is used in extremely high temperatures, a safety device will automatically prevent operation. To insure longer battery life: • While not in use, remove Battery from the Palmcorder and AC Adaptor and store in a cool, dark, dry place. If you leave the Battery in the Palmcorder or on the AC Adaptor, the Battery will no longer be rechargeable. • Keep the Battery terminals clean. 1 Slide the Battery upward while sliding the BATTERY RELEASE Switch to remove the Battery Pack. (See page 11.) 2 Insert the DC Cable into the DC IN Terminal. 3 Connect the other end of the DC Cable to the AC Adaptor as shown. 4 Plug in the AC Adaptor. • The POWER Lamp on the AC Adaptor lights up. DC IN Terminal 3 1 DC IN Terminal POWER Lamp DC Cable (Supplied) Note • When not in use, unplug the AC Adaptor from the AC outlet. (AC Adaptor consumes 1 W of electric power when plugged into an AC outlet even when not in use.) 2 DC Output Connector 12 For assistance, please call : 1-800-211-PANA(7262) or send e -mail to : [email protected]